D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
etc
/
sane.d
/
Filename :
mustek_pp.conf
back
Copy
# For documentation see sane-mustek_pp(5) # Global options: # =============== # # option no_epp # # Disable parallel port mode EPP: works around a known bug in # the Linux parport code. Enable this option, if the backend # hangs when trying to access the parallel port in EPP mode: # # # SANE_DEBUG_SANEI_PA4S2=128 scanimage -L # ... # hangs here -> [sanei_pa4s2] sanei_pa4s2_readbyte: read in EPP mode # # Scanner definition template: # ============================ # # scanner <name> <port> <type> # option <optname> <optval>? # option <optname> <optval>? # ... # # where: # # <name> is an arbitrary name for the scanner (eg. Mustek-1200CP) # # <port> is the parallel port to which the scanner is connected # Possible values are 0x378, 0x278, and 0x3bc. For Linux, the # mapping between ports an numbers is different for kernel # version 2.2 and 2.4. Port 0x378 corresponds to lp0 on 2.4 kernel. # If you are using libieee1284, you can as well use parport0, etc.. # If you use the magic value * the port is probed. # # <type> is an identification of the scanner type. # Possible values are: # - cis600 (for Mustek 600CP & OEM versions), # - cis1200 (for Mustek 1200CP & OEM versions), # - cis1200+ (for Mustek 1200CP+ & OEM versions), # - ccd300 (for Mustek 600 III EPP & OEM versions) # - ... more types will be added in the future # # <optname> is a name of an option, and <optval> an optional value # for the option. # Currently available options for *CIS* type scanners are: # - top_adjust <value>: # Vertical adjustment of origin, in millimeter. # Values between -5.0 and +5.0 mm are possible # (floating point). # Default: 0.0 # - slow_skip: # Boolean option. Disables fast skipping to the start # of the scan region. May be necessary in case fast # skipping results in inaccuracies. # Default: fast skipping enabled # - bw <value>: # Black/white discrimination value for lineart scans. # Pixel values below that value are considered black, # others are considered white. Range: 0-255. # Default: 127 # # Currently available options for *CCD* type scanners are: # - wait_bank <value> # usecs to wait for a bank change. Positive integer # values are possible. You shouldn't mess with this # parameter. # Default: 700 # - bw <value> # Black/white discrimination value for lineart scans. # Pixel values below that value are considered black, # others are considered white. Range: 0-255. # Default: 127 # - top <value> # Scanlines to skip to the top area. Positive integer # values are possible. 47 and 56 are values I know of. # Default: 47 # # # Example for a LifeTec LT9350 (Mustek 1200CP clone): # # scanner LT9350 0x378 cis1200 # option top_adjust 0 # option bw 127 # # Example for Mustek 6000P # # scanner 6000P 0x378 ccd300 # option top 56 # # # Uncomment/customize to your needs # # scanner Mustek-600CP 0x378 cis600 # scanner Mustek-1200CP 0x378 cis1200 # scanner Mustek-1200CP+ 0x378 cis1200+ # scanner Mustek-600-IIIEP 0x378 ccd300 # # auto probing: # # scanner mustek-cis600 * cis600 # scanner mustek-cis1200 * cis1200 # scanner mustek-cis1200+ * cis1200+ # scanner mustek-ccd300 * ccd300